Right here in the next paragraph yow will discover lots of dependable points on the subject of What Would Cause My Electric Water Heater to Stop Working?.
Many contemporary homes use an electrical water heater for their heater, as a result of its convenience as well as convenience of use. However, similar to any other electrical home appliances, troubles may occur with its use, unexpectedly. It can be truly irritating to awaken to a cold shower rather than a warm one or having your bath with water that isn't hot adequate or even as well warm. Whatever the instance may be, water heater issues can be fairly nerve-racking. Luckily, we have actually made a list of possible options to your hot water heater issues. There are a number of elements that can create a lot of these problems, it could be a problem with the power supply, the electric burner, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for safety and security. Whatever the trouble is, getting it dealt with should not position excessive of a problem if you adhere to these actions:
Call A Specialist:
If after replacing all faulty parts as well as resetting your temperature level, the hot water heater still isn't functioning, you might require to speak to an expert plumber for a professional opinion. The problem with your heater could be that the hot and cold taps have been switched or it might be undersized for the amount of hot water required in your house. Whatever the instance might be, a specialist plumber would certainly aid fix the issue.
Inspect Your Power Supply:
As fundamental as this might seem, it is extremely required. Without appropriate power, your water heater will not function. So the first thing to do when your water suddenly stops working is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the concern, merely transform it on and off once more. Change any type of broken or worn-out fuse. Evaluate the appliance with power after these changes to see if it's currently functioning.
Inspect Your Thermostat:
If your water heater still isn't working or the water coming out isn't warm sufficient, you might need to check the temperature level setups on your top thermostat. Guarantee the circuit breaker is switched off prior to doing anything. Open up the gain access to panel and press the red switch for temperature level reset above the thermostat. This ought to help warm the water. Transform the circuit breaker back on and check if the trouble has actually been fixed.
Check the Burner in the Hot Water Heater:
If it's not a power issue, then attempt looking into your burner if it is still working. Test each of your burner to make sure the trouble isn't with any one of them. If any of them is faulty, change that part and afterwards inspect whether the warm water is back on.
Final thought
Water heater troubles are not always significant. A number of them are due to small problems like a blown fuse or damaged burner. Replacing the damaged components should suffice. Nevertheless, if you are still unable to address the issue, give a call to your nearest plumber ahead to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our post about Hot Water Heater Repair. Thanks for taking a few minutes to read through our short article. Are you aware of another individual who is curious about the topic? Feel free to share it. Many thanks for your time. Visit again soon.
Set Up An Appointment